SRJC Course Outlines

11/13/2019 4:29:51 AMENGR 25 Course Outline as of Fall 2014

Changed Course
CATALOG INFORMATION

Discipline and Nbr:  ENGR 25Title:  ENGR GRAPHICS & DESIGN  
Full Title:  Engineering Graphics and Design
Last Reviewed:2/24/2014

UnitsCourse Hours per Week Nbr of WeeksCourse Hours Total
Maximum3.00Lecture Scheduled2.5017.5 max.Lecture Scheduled43.75
Minimum3.00Lab Scheduled1.506 min.Lab Scheduled26.25
 Contact DHR0 Contact DHR0
 Contact Total4.00 Contact Total70.00
 
 Non-contact DHR0 Non-contact DHR Total0

 Total Out of Class Hours:  87.50Total Student Learning Hours: 157.50 

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly: 

Catalog Description:
Untitled document
Students will develop three dimensional visualization and design skills using freehand sketching and solid modeling software.  Design projects will develop teamwork and project skills as well as an understanding of the industry standards for mechanical engineering drawings.

Prerequisites/Corequisites:
Course Completion of MATH 25 and MATH 58; OR Completion of MATH 27 or higher (VF)


Recommended Preparation:
Course Completion of APTECH 46

Limits on Enrollment:

Schedule of Classes Information
Description: Untitled document
Students will develop three dimensional visualization and design skills using freehand sketching and solid modeling software.  Design projects will develop teamwork and project skills as well as an understanding of the industry standards for mechanical engineering drawings.
(Grade Only)

Prerequisites:Course Completion of MATH 25 and MATH 58; OR Completion of MATH 27 or higher (VF)
Recommended:Course Completion of APTECH 46
Limits on Enrollment:
Transfer Credit:CSU;UC.
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:Effective:Inactive:
 Area:
 
CSU GE:Transfer Area Effective:Inactive:
 
IGETC:Transfer Area Effective:Inactive:
 
CSU Transfer:TransferableEffective:Spring 1989Inactive:
 
UC Transfer:TransferableEffective:Spring 1989Inactive:
 
C-ID:

Certificate/Major Applicable: Major Applicable Course



COURSE CONTENT

Outcomes and Objectives:
Upon completion of the course, students will be able to:
Untitled document
Upon successful completion of the course, students will be able to:
1. Make freehand pictorial, isometric and orthographic sketches of objects.
2. Construct auxiliary views and section views.
3. Apply the terminology and standards of geometric tolerancing to mechanical working drawings.
4. Construct solid models, working drawings and assemblies of objects using feature based computer aided design (CAD) software.
5. Apply teamwork skills in group activities and projects.
6. Describe models of the engineering design process and their key common features.

Topics and Scope
Untitled document
All of these topics will be covered in both lecture and lab formats using freehand sketching and CAD software.
1.  Isometric and orthographic views
2.  Primary auxiliary views of objects
3.  Section and detail views
4.  Conventional dimensioning and tolerancing
5.  Geometric dimensioning and tolerancing basics
6.  American National Standards Institute hole basis fits
7.  Algorithms for the engineering design process
8.  Concurrent engineering and design for manufacturing concepts
9.  Documentation standards for engineering projects
10. Feature based parametric solid modeling
11. Part drawing construction and annotation
12. Assembly drawing construction
13. Introduction to finite element analysis
14. Introduction to rapid prototyping
15. Engineering design team skills
16. Common requirements for oral engineering presentations

Assignments:
Untitled document
1.  Manual worksheets (20-40)
2.  CAD drawings (15-30)
3.  Design project documentation portfolios (1-2)
4.  Constructed models for engineering design project (1-2)
5.  Individual or group oral presentations (1-2)
6.  Midterm exams (2-4)
7.  Final exam

Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.Writing
0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments and skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.Problem Solving
10 - 25%
Manual worksheets
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.Skill Demonstrations
20 - 40%
CAD drawings, oral presentations
Exams: All forms of formal testing, other than skill performance exams.Exams
25 - 40%
Exams: Short Answer, manual sketching and solutions, CAD models and drawings
Other: Includes any assessment tools that do not logically fit into the above categories.Other Category
10 - 30%
Project design portfolio, constructed project


Representative Textbooks and Materials:
Untitled document
Bethune, Engineering Design Graphics with Autodesk Inventor 2013, Peachpit Press, 2013
Shih, Parametric Modeling with Autodesk Inventor 2013, SDC Publications, 2013
Sexton, A Concise Intro to Engineering Graphics, 4th Edition, SDC Publications, 2010
Instructor prepared materials

Print PDF