Automotive Technology (AA) Industrial & Trade Technology Total Units: 48.0

Term Effective: Spring 2019

The requirements for this program of study are effective beginning the semester shown above. If you began working on this program before the effective semester, you may not be affected by the changes. Consult with the program contact person or the department chair to determine your eligibility to complete the program under previous requirements.

Term Inactive: Fall 2019

Associate Degree Requirements:

The major is one of several requirements students need to fulfill in order to be awarded the Associate Degree, the highest level of academic achievement recognized by Santa Rosa Junior College. Please note that all of the following requirements must be met in order for the degree to be conferred:

For all students admitted for the Fall 2009 term or any term thereafter, a grade of "C" or better, or "P" if the course is taken on a pass/no pass basis, is required for each course applied toward the major.

Previous Versions:

Automotive Technology - effective Fall 2018
Automotive Technology - effective Fall 2017
Automotive Technology - effective Fall 2016
Automotive Technology - effective Fall 2015
Automotive Technology - effective Fall 2014
Automotive Technology - effective Fall 2012
Automotive Technology - effective Spring 2012
Automotive Technology - effective Spring 2011
Automotive Technology - effective Fall 2010
Automotive Technology - effective Summer 2007
Automotive Technology - effective Fall 2006


The Automotive Technology major offers both theoretical and hands-on training, including engine overhaul, ignition systems, fuel systems, pollution control systems, electrical systems, drive trains, brake systems, suspension systems, and hybrid & electric vehicle systems. Course work prepares students to take the eight Automotive Service Excellence (ASE) exams. Students enrolling in the program should have the desire and ability to work with their hands, possess a high degree of mechanical aptitude and enjoy working in a shop environment. Program completers should be able to find employment as advanced entry-level apprentice automotive technicians.

Those who complete the Automotive Technology program, pass ASE tests A6 and A8 and successfully complete AUTO 108 (Clean Air Car Course Basic & Enhanced), will meet the requirements to take the Basic Area Smog Check test required to become a Licensed Basic Area Smog Check Technician.

Automotive mechanics repair and service automobiles and other gas-powered vehicles. Automobile mechanics have many duties, depending on the size and kind of shop in which they work. In smaller shops, mechanics do all kinds of repair work, from simple engine tune-ups to the tearing down, repairing and rebuilding of complete power systems. They also service and repair electrical systems; align and service suspension, braking and steering systems; repair and adjust transmissions and differentials; repair and service air conditioning, heating and engine-cooling systems; and do all necessary mechanical checks. In larger shops, some of this work may be done by specially trained mechanics who primarily perform one type of repair or service and may be assigned by their specialty, such as brake repairers, transmission mechanics or front-end mechanics.

Technological advances and continued expansion of the automotive industry have increased the demands for well-trained entry level technicians both locally and state wide.

Students interested in a suggested order for taking classes in this program, please check with the department.

This program of study is also available as a certificate option.

Program Student Learning Outcomes:

Upon successful completion of this program, the student will be able to:

  1. Demonstrate safe operation of hand tools, power tools and specialized automotive tools and equipment;
  2. perform entry level diagnoses and repair of automotive engines, electrical systems, transmissions, engine performance, brakes, chassis and emissions control systems;
  3. demonstrate basic maintenance and welding skills; and
  4. access and interpret automotive service information and schematics both manually and on the computer.

Program Requirements:

The requirements for the Automotive Technology program are:

  • Complete 48.0 units from
    • Automotive Technology Requirements
    • Information Learning Resources Requirement

Automotive Technology Requirements - complete 47.00 units
AUTO 80Introduction to Automotive Technology3.00
AUTO 125Automotive Heating and Air Conditioning Systems1.50
AUTO 151Automotive Engines7.00
AUTO 153Automotive Engine Performance and Pollution Control7.00
AUTO 154Automotive Brakes, Steering, and Suspension7.00
AUTO 155Automotive Drive Train6.00
AUTO 156Automotive Electrical System5.00
AUTO 194Introduction to Hybrid Vehicle Maintenance and Repair4.00
IED 190Industrial Mathematics1.50
WELD 70Beginning Welding: Fundamentals2.00
Complete any combination totaling at least 3.00 units from the following:
AUTO 99Automotive Occupational Work Experience0.50-8.00
AUTO 108Clean Air Car Course: BAR Levels 1 & 25.00
AUTO 120Automotive Service Advisor, Business Ethics, and Management3.00
BGN 101Typing1.50
ELEC 51AFundamentals of Electricity3.00
MACH 51ABeginning Machine Tool Technology2.00
MACH 51BAdvanced Machine Tool Technology2.00
WELD 171.1Advanced Shielded Metal Arc Welding2.00
WELD 171.2Gas Metal Arc Welding and Gas Tungsten Arc Welding2.00
WELD 171.3Flux Core Arc Welding (FCAW)2.00
Information Learning Resources Requirement - complete 1.00 units
LIR 10Introduction to Information Literacy1.00

Course Prerequisites and Advisories:

Courses in a program of study may have prerequisites or advisories; that is, courses that must or should be completed before taking that course. Please check for prerequisites or advisories by clicking on the course numbers in the Program Requirements section.

It is important that students who are completing an Associate Degree and desire to transfer to a four-year institution meet with a counselor to plan their lower division coursework. While many majors at SRJC are intended to align with lower division major preparation required by California public universities, specific lower-division major requirements vary among individual campuses. See a counselor, visit the Transfer Center, and check Guides For Transfer in Specific Majors, and ASSIST to review transfer preparation guides for specific schools and majors.


It is recommended that students with no automotive work experience or high school auto shop begin with course AUTO 80 Introduction to Automotive Technology.

Phone Email Website
(707) 527-4404