8/31/2024 11:24:15 PM |
| Changed Course |
CATALOG INFORMATION
|
Discipline and Nbr:
HORT 195 | Title:
CAD:LANDSCAPE DESIGN |
|
Full Title:
CAD: Landscape Site Plans |
Last Reviewed:2/11/2019 |
Units | Course Hours per Week | | Nbr of Weeks | Course Hours Total |
Maximum | 3.00 | Lecture Scheduled | 2.00 | 17.5 max. | Lecture Scheduled | 35.00 |
Minimum | 3.00 | Lab Scheduled | 3.00 | 6 min. | Lab Scheduled | 52.50 |
| Contact DHR | 0 | | Contact DHR | 0 |
| Contact Total | 5.00 | | Contact Total | 87.50 |
|
| Non-contact DHR | 0 | | Non-contact DHR Total | 0 |
| Total Out of Class Hours: 70.00 | Total Student Learning Hours: 157.50 | |
Title 5 Category:
AA Degree Applicable
Grading:
Grade or P/NP
Repeatability:
00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As:
Formerly:
Catalog Description:
Untitled document
Introduction to computer assisted landscape drafting utilizing CAD (computer-aided drafting) software to produce professional quality landscape site plans for residential and small commercial sites. Particular attention given to drafting base plans, building footprints, and other simple hardscape features, planting bed lines, plant symbolization and irrigation plan layout.
Prerequisites/Corequisites:
Course Completion of HORT 93
Recommended Preparation:
Course Completion of APTECH 46
Limits on Enrollment:
Schedule of Classes Information
Description:
Untitled document
Introduction to computer assisted landscape drafting utilizing CAD (computer-aided drafting) software to produce professional quality landscape site plans for residential and small commercial sites. Particular attention given to drafting base plans, building footprints, and other simple hardscape features, planting bed lines, plant symbolization and irrigation plan layout.
(Grade or P/NP)
Prerequisites:Course Completion of HORT 93
Recommended:Course Completion of APTECH 46
Limits on Enrollment:
Transfer Credit:
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP
ARTICULATION, MAJOR, and CERTIFICATION INFORMATION
Associate Degree: | Effective: | | Inactive: | |
Area: | | |
|
CSU GE: | Transfer Area | | Effective: | Inactive: |
|
IGETC: | Transfer Area | | Effective: | Inactive: |
|
CSU Transfer: | | Effective: | | Inactive: | |
|
UC Transfer: | | Effective: | | Inactive: | |
|
C-ID: |
Certificate/Major Applicable:
Both Certificate and Major Applicable
COURSE CONTENT
Student Learning Outcomes:
At the conclusion of this course, the student should be able to:
Untitled document
1. Use CAD (computer-aided drafting) software to produce professional quality landscape site
plans for residential and small commercial sites.
2. Use CAD software to show base plans, building footprints, property lines, and other simple
site features.
3. Apply CAD software graphic symbols to landscape plans including vegetation and pattern
lines, plant outlines, locating trees and shrubs.
4. Apply correct symbols and labeling styles for an irrigation plan layout including irrigation
heads, valves, pipe, drip irrigation, and mainline pipe layout/placement.
Objectives:
Untitled document
At the conclusion of this course, the student should be able to:
1. Create a new landscape drafting project using the CAD software program.
2. Prepare a base plan for a landscape drafting project.
3. Place and modify text in a drawing.
4. Illustrate plants in a landscape planting plan.
5. Create a plant table to identify plant material in a planting plan.
6. Develop a computer drafted irrigation plan from a schematic drawing.
7. Arrange lateral and mainline pipe in an irrigation plan.
Topics and Scope
Untitled document
I. Beginning the Project
A. Adding a project
B. Default CAD settings
C. Plot scales
II. Base Plan
A. Property line input
B. Property line creation
1. line construction
2. connecting construction line end points
3. annotating lines
C. Baseline Offsets
D. Drafting a building footprint
E. Inserting openings in building footprint
F. Utility symbols
III. Dimensioning and Labeling
A. Placing/editing text
B. Summing areas and lengths by layer
1. sum area by layer
2. sum by length of lines
IV. Landscape Layout
A. Symbol graphics
1. drawing vegetation lines
2. pattern lines
3. plant shadowing
4. placing edge stippling
5. other symbol graphics
B. Locating trees and shrubs
1. locating hedge grove
2. locating hedge row
C. Converting symbols and modifying attributes
1. converting a conceptual design to a plant layout
2. modify plant attributes
D. Labels
1. labeling symbols
2. editing labels
V. Plant Selection and Plant Table
A. labeling plants
B. editing plant labels
C. plant selection
D. creating plant tables
VI. Quantity Takeoffs and Estimates
VII. Irrigation Design
A. Getting Started
1. symbol configuration
2. head configuration
B. Placing Irrigation Heads
1. auto head layout
2. locate on edge
3. single head replacement
C. Placing Pipe
1. placing lateral and mainline pipes
2. autopipe layout
a. placing laterals
b. autosizing laterals
3. autosizing laterals
D. Mainline Pipe Design/Placement
1. mainline pipe settings
2. drawing mainline pipe
3. autosizing
E. Completing an Irrigation Plan
1. symbols
2. table
VIII. Materials Takeoff and Estimate
All topics are covered in the lecture and lab portions of the course
Assignments:
Untitled document
Lecture-Related Assignments:
1. Quizzes (2 - 14), and exams (1 - 2)
2. Weekly reading and homework: 5-10 pages per week
Lab-Related Assignments:
1. Lab exercises (4 - 12) related to basic CAD commands, production of base maps, drafting a
site from field measurements, converting hand drawn designs into CAD, creating and
drafting of a landscape master plan, and creating and drafting of construction documents
such as: planting plans, irrigation plans, lighting plans, and/or construction details
Both Lecture- and Lab-Related assignments:
1. Final project and presentation: landscape design plan package
2. Field trips may be required (0 - 4)
Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing. | Writing 0 - 0% |
None | |
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments and skill demonstrations are more appropriate for this course. |
|
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills. | Problem Solving 10 - 20% |
Homework, Lab exercises | |
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams. | Skill Demonstrations 50 - 70% |
Lab exercises, Final Project and Presentation | |
Exams: All forms of formal testing, other than skill performance exams. | Exams 20 - 40% |
Quizzes and exams; Multiple choice, True/false, Matching items, Completion, Short answer | |
Other: Includes any assessment tools that do not logically fit into the above categories. | Other Category 0 - 20% |
Participation and attendance, including field trips. | |
Representative Textbooks and Materials:
Untitled document
Periodicals and professional journals.
Instructor prepared materials.
Print PDF