Untitled document
I. Orientation and Administration
A. Review of course syllabus
1. objectives
2. methods of evaluation
3. participation requirements
B. Review of training facilities
II. Firefighter II Certification Test and Capstone Task Book process
A. Written test
1. online test registration process
2. online written test
B. Skills test
1. mandatory skills
2. random skills
C. CapstoneTask Book process
III. Organizing and Coordinating the ICS until Command is Transferred
A. Determining the need for command
B. Implementing the ICS
C. Coordinating an incident until transfer of command occurs
D. Transferring command to an incoming Incident Commander (IC)
E. ICS roles often assumed after transfer of command
1. Division or Group Supervisor
2. Operations Section Chief
3. Incident Safety Officer
4. Public Information Officer
5. Liaison Officer
IV. Completing Incident Reports (IR's)
A. Use of the National Fire Incident Reporting System (NFIRS) codes
B. Use of equipment used to complete incident reports
C. Completion of required fields
D. Recording all pertinent information and narrative sections
E. Proofreading
F. Forwarding reports following department policy
V. Extinguishing an Ignitable Liquid Fire
A. Selecting the appropriate foam concentrate
B. Setting up and assembling foam stream components
C. Approaching the fire as a team using one of the following techniques
1. Roll-On method
2. Bank-Down method
3. Rain-Down method
D. Applying foam to the fire surface and maintaining a foam blanket
E. Extinguishing the fire and preventing re-ignition
F. Maintaining team protection with a foam stream
G. Facing the hazard until retreating to a safe location
VI. Controlling a Flammable Gas Cylinder Fire
A. Identifying container contents and safe havens prior to advancing
B. Advancing the attack team in a controlled manner maintaining team integrity
C. Operate the nozzle with different patterns to accomplish the following:
1. straight stream for reach and initial cooling
2. narrow fog to cool the cylinder
3. wide fog to shield personnel from heat and push flames away from control valves
D. Cite the common indicators used for assessing cylinder integrity and monitor for changing conditions
E. Select appropriate procedures for situational changes that may occur
F. Advance and position fire streams in a manner that provides safe access for personnel to operate control valves
G. Operate control valves so that gas flow is stopped
H. While facing the hazard, retreat in a smooth and controlled manner until the team reaches a safe haven
VII. Coordinate an Interior Attack on a Structure Fire
A. Assemble a team for the fire attack
B. Conduct a size-up and communicate an action plan to the team
C. Select appropriate tools and equipment for forcible entry
D. Evaluate fire conditions upon entry and forecast anticipated fire spread
E. Request coordinated ventilation activities based on fire conditions
F. Request search and rescue activities base on fire conditions and known information
G. Identify any developing or hazardous building or fire conditions and communicate to incident commander
H. Correctly extinguish fire using the appropriate pattern based on fire conditions
VIII. Extricate a Victim Entrapped in a Motor Vehicle
A. Vehicle components that can be removed to facilitate extrication:
1. Roofs
2. Doors
3. Windshields
4. Steering wheels and columns
5. Dashboards
B. Size up the situation to identify hazards, determine required stabilization, and select appropriate extrication techniques
C. Stabilize a vehicle using cribbing and shoring material
D. Operate both hand and power extrication tools in a safe and efficient manner
E. Perform extrication techniques and disentangle victim without causing further injury
IX. Assist Rescue Operations Team
A. Identify potential rescue scenarios
1. Structural collapse
2. Trench collapse
3. Cave or tunnel emergencies
4. Water emergencies
5. Elevator emergencies
6. Escalator emergencies
7. Energized electrical line emergencies
8. Industrial accidents
B. Selection of the tools and equipment used to perform a special rescue
C. Establish public barriers so that bystanders are isolated from the rescue scene
D. Assist rescue teams by completing assigned tasks
X. Perform a Fire Safety Survey in a Private Dwelling
A. Proper introduction and explanation of the purpose of the fire safety survey
B. Identification of common fire hazards (electrical, cooking, storage or flammables)
C. Checking the function and operation of smoke and carbon monoxide detectors
D. Reviewing exit drills with occupants
E. Checking heating systems and other heating sources for proper clearance from combustible materials
F. Check for obvious structure hazards
G. Check for combustible waste hazards (trash, sawdust, paper)
H. Explain findings and unresolved issues to occupant and provide referrals as needed
I. Complete all related survey forms and file in accordance with local policies
XI. Presenting Fire Safety Information
A. Organizing and preparing material prior to the presentation
B. Clearly stating the topic and objective(s) to the group
C. Teaching the lesson in accordance with the objectives
D. Using supplies and equipment appropriate for the lesson
E. Use of instructional techniques appropriate for the age of the audience
F. Referring questions to the appropriate personnel
XII. Preparing Pre-Incident Surveys
A. Notifying the building occupant and arranging to conduct the survey
B. Identifying the fire detection and suppression systems to include in the survey
C. Sketching the site, building, and applicable special features
D. Identifying applicable hazards to include in the pre-incident sketches
E. Identifying special considerations to include in the pre-incident sketches
F. Completing related department forms and diagrams
G. Routing and filing the report in accordance with local polices
XIII. Maintaining Power Equipment
A. Identify different types of power equipment
1. power plants (hydraulic or portable pumps)
2. power tools (chainsaws, smoke ejector, rotary saw, etc.)
3. lighting equipment (generator, cord reel, light standard)
B. Inspecting power and lighting equipment to ensure it is in a ready state
C. Starting and operating power equipment
D. Using manufacturer and department guidelines for maintaining power equipment
E. Completing applicable maintenance documents and records
F. Reporting out of service equipment in accordance with local procedures
XIV. Performing Annual Hose Service Test
A. Inspect hose condition, inspect gasket, and mark hose directly behind coupling
B. Assemble hose line to a maximum of 300 feet and connect to the hose tester discharge port
C. Fill hose with water and bleed air from all lines
D. Check couplings for leaks and tighten as needed
E. Operate hose tester machine so that all hose lines are pressurized in accordance with National Fire Protection Association (NFPA) 1962
F. Maintain test pressure for five (5) minutes and observe for leaks or weeping
G. Reduce hose pressure and bleed lines and inspect each hose for slipped couplings
H. Completion of all applicable recording and reporting in accordance with local policies
I. Report any out of service hose in accordance with local policies
All topics are covered in both the lecture and lab parts of the course.