8/31/2024 11:22:47 PM |
| Changed Course |
CATALOG INFORMATION
|
Discipline and Nbr:
MACH 51B | Title:
ADV MACHINE TOOL TECH |
|
Full Title:
Advanced Machine Tool Technology |
Last Reviewed:2/28/2022 |
Units | Course Hours per Week | | Nbr of Weeks | Course Hours Total |
Maximum | 2.00 | Lecture Scheduled | 1.00 | 17.5 max. | Lecture Scheduled | 17.50 |
Minimum | 2.00 | Lab Scheduled | 3.00 | 17.5 min. | Lab Scheduled | 52.50 |
| Contact DHR | 0 | | Contact DHR | 0 |
| Contact Total | 4.00 | | Contact Total | 70.00 |
|
| Non-contact DHR | 0 | | Non-contact DHR Total | 0 |
| Total Out of Class Hours: 35.00 | Total Student Learning Hours: 105.00 | |
Title 5 Category:
AA Degree Applicable
Grading:
Grade Only
Repeatability:
00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As:
Formerly:
Catalog Description:
Untitled document
Advanced machining processes involving the use and care of lathe, mill, drill, drill press, and common hand tools. Measurement, layout and heat treatment of metal. Application of processes in manufacturing and industry.
Prerequisites/Corequisites:
Course Completion of MACH 51.1A ( or MACH 51A)
Recommended Preparation:
Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Schedule of Classes Information
Description:
Untitled document
Advanced machining processes involving the use and care of lathe, mill, drill, drill press, and common hand tools. Measurement, layout and heat treatment of metal. Application of processes in manufacturing and industry.
(Grade Only)
Prerequisites:Course Completion of MACH 51.1A ( or MACH 51A)
Recommended:Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Transfer Credit:CSU;
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP
ARTICULATION, MAJOR, and CERTIFICATION INFORMATION
Associate Degree: | Effective: | | Inactive: | |
Area: | | |
|
CSU GE: | Transfer Area | | Effective: | Inactive: |
|
IGETC: | Transfer Area | | Effective: | Inactive: |
|
CSU Transfer: | Transferable | Effective: | Fall 1981 | Inactive: | |
|
UC Transfer: | | Effective: | | Inactive: | |
|
C-ID: |
Certificate/Major Applicable:
Both Certificate and Major Applicable
COURSE CONTENT
Outcomes and Objectives:
At the conclusion of this course, the student should be able to:
Untitled document
Upon successful completion of this course, the student will be able to:
1. Safely operate a variety of machine tools without supervision.
2. Set up machines and produce machine parts independently.
3. Calculate speeds, feeds, and R.P.M.s for machining various metals.
4. Perform precision layouts using metrology layout tools.
5. Calculate and cut tapers and angles.
6. Determine tolerances according to manufacturing standards.
7. Measure, layout, and heat treat metal for fabrication.
8. Produce a machine or tool part per a blueprint.
9. "Finish" a part according to print-specified level.
10. Make calculations for gear production.
11. Measure and inspect gears.
12. Identify and locate information in text manuals used in industry.
13. Demonstrate professionalism in shop practices and procedures.
Topics and Scope
Untitled document
I. Orientation and Safety
II. Materials and Processes
A. Ferrous metals
B. Non-ferrous metals
III. Calculations for Various Metals
A. Feeds
B. Speeds
C. R.P.M. (revolutions per minute)
IV. Metrology Layout Tools
A. Sine bars
B. Ball bar
C. Protractors
D. Vernier height gages
E. Surface gauge
F. Optical alignment magnifier
V. Drills and Drilling Operations and Set-ups
A. CSK (counter-sinks)
B. Reams
C. Taps and tap heads
VI. Advanced Lathe Operations
A. Cutting tapers
B. Cutting angles
C. Chamfers
VII. Work Holding Devices Used on Lathes
A. 4-jaw chucks
B. Faces plates
C. Collet chucks
D. Turret lathes
VIII. Tool Use, Care, and Identification
A. Ceramic cutting tools
B. Carbide tooling and tool steels
C. Form Tools
D. Coolants
E. Cutting fluids
IX. Cutting Tools
A. Broaches
B. Slotters
C. Key way cutters
D. Calculations
X. Mill Machine Characterization
A. Accurate machining surfaces
B. Finishes
C. Limited tolerances
XI. G.D.T. (geometric dimensioning and tolerances)
A. Applications for tolerances
B. Allowances
C. Precise fitting
D. Manufacturing standards
XII. Abrasives
A. Honing
B. Capping
C. Grinding
D. Microfinishes
E. Identifying finishes
F. Levels of required finishes per print
XIII. Use and Care of Gear Cutting Machines and Cutters
A. Gear terminology
B. Calculations for gear production
C. Measurement and inspection of gears
D. Identifying wear
E. Maintaining accuracy of gear components
1. in production
2. in use
XIV. Use and Care of Text Manuals Used in Industry
A. Machinery handbooks
B. ASTM (American Standards and Testing of Materials)
C. A.S.M. (American Standards of Materials)
XV. Metrics
A. Application
B. Use of conversion tables used in industry
XVI. Professionalism
Assignments:
Untitled document
Assignments may include:
1. Readings in assigned text, approximately 15-20 pages per week.
2. Lab projects will be graded for skill demonstration and problem solving
and may include:
a) Calculations of speeds and feeds.
b) Cut taper, angles, and chamfers.
c) Cut a Morris taper and verify angles with a sine bar and dial
indicator.
d) Produce a gear from a blank.
e) Cut internal threads on a lathe using a boring bar.
3. Compile a notebook of lab notes and handouts.
4. Organize workspace and clean up lab area.
5. Quizzes, mid-term and final objective and performance exams.
Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing. | Writing 10 - 20% |
Compile a notebook of lab notes and handouts. | |
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills. | Problem Solving 20 - 30% |
Lab projects. | |
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams. | Skill Demonstrations 20 - 30% |
Class performances, Performance exams | |
Exams: All forms of formal testing, other than skill performance exams. | Exams 20 - 30% |
Multiple choice, True/false, Matching items, Completion | |
Other: Includes any assessment tools that do not logically fit into the above categories. | Other Category 0 - 10% |
Participation, preparation, work habits , attitude. | |
Representative Textbooks and Materials:
Untitled document
Machine Tool Practices, Richard Kibbe et al. Prentice Hall, 2003.
Print PDF