12/27/2024 9:18:06 AM	APTE 45 Course Outline as of Summer 2025	Changed Course
CATALOG INFORMATION
Discipline and Nbr:  APTE 45	Title:  BASIC DRAFTING SKLS
Full Title:  Basic Drafting Skills
Last Reviewed:5/8/2023

Units		Course Hours per Week			Nbr of Weeks	Course Hours Total
Maximum	1.50	Lecture Scheduled	1.00		17.5 max.	Lecture Scheduled	17.50
Minimum	1.50	Lab Scheduled	1.50		4 min.	Lab Scheduled	26.25
		Contact DHR	0			Contact DHR	0
		Contact Total	2.50			Contact Total	43.75
		Non-contact DHR	0			Non-contact DHR Total	0

Total Out of Class Hours:  35.00

Total Student Learning Hours: 78.75

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly:  APTECH 45

Catalog Description:

In this course, students will learn drawing-based manual drafting with a cursory introduction to Computer-Aided Drafting (CAD) for comparison. Topics include proper use of drafting tools, development of linework and lettering skills, procedures for geometric constructions, freehand drafting/sketching, orthographic projection, and isometric drawing.

Prerequisites/Corequisites:

Recommended Preparation:

Limits on Enrollment:

Schedule of Classes Information
Description:

In this course, students will learn drawing-based manual drafting with a cursory introduction to Computer-Aided Drafting (CAD) for comparison. Topics include proper use of drafting tools, development of linework and lettering skills, procedures for geometric constructions, freehand drafting/sketching, orthographic projection, and isometric drawing.

(Grade Only)
Prerequisites:
Recommended:
Limits on Enrollment:
Transfer Credit:CSU;UC.
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:		Effective:		Inactive:
Area:
CSU GE:	Transfer Area			Effective:	Inactive:
IGETC:	Transfer Area			Effective:	Inactive:
CSU Transfer:	Transferable	Effective:	Fall 1989	Inactive:
UC Transfer:	Transferable	Effective:	Fall 1991	Inactive:
C-ID:

Certificate/Major Applicable: Both Certificate and Major Applicable

COURSE CONTENT

Student Learning Outcomes:
At the conclusion of this course, the student should be able to:

1. Describe the role of drawing and drafting in contemporary industries

2. Utilize manual drafting equipment to produce technical drawings

3. Compare manual drafting to Computer-Aided Drafting (CAD) methods

 

Objectives:

At the conclusion of this course, the student should be able to:

1. Describe drafting career and employment opportunities in contemporary industries

2. Select appropriate drafting equipment and supplies

3. Utilize drafting tools effectively in the production of drafting projects

4. Produce consistent linework on drafting projects

5. Produce legible lettering in drafting projects

6. Execute geometric constructions

7. Execute sketching and freehand drafting

8. Develop orthographic projections and isometric drawings

9. Utilize dimensioning conventions

10. Prepare hand-drafted working drawings

11. Compare manual-drafting to CAD-drafting processes

Topics and Scope

I. Introduction to Contemporary Drafting

    A. History of the profession

    B. Drafting occupations and industries

    C. Language of drawing

    D. Design process

    E. Contemporary drafting

    F. Types of basic engineering graphics

II.  Drafting Equipment and Supplies

    A. Conventional drafting supplies

    B. Conventional drafting equipment

    C. Production of copies and prints

III. Drafting Conventions and Formats

    A. Linework

         1. Conventions

         2. Use of tools

         3. Drawing procedure

         4. Construction linework

         5. Reproducible linework

    B. Lettering

         1. Conventions

         2. Lettering shapes

         3. Lettering practice

    C. Drafting conventions

    D. Drawing formats

IV.  Geometric Construction

    A. Use of compass and other tools for geometric constructions

    B. Basic geometric drafting techniques

         1. Dividing lines

         2. Constructing regular polygons

    C. Complex geometric constructions

         1. Tangencies of lines, arcs, and circles

         2. Fillets

V.   Freehand drawing

    A. Sketching for technical drawings

    B. Freehand drafting techniques

VI.  Introduction to Multiview Orthographic Projection

    A.  Principles

         1. Selection of views

         2. Freehand three-view drawings

         3. Planes of projection

         4. Angles of projection

         5. Visualization

    B. Drawing procedures

    C. Orthographic projections from incomplete data

    D. Isometric drawing

         1. Introduction to isometrics

         2. Drawing isometrics using instruments

VII. Dimensions and Tolerances

    A. Systems of dimensioning

    B. Dimensioning elements

    C. Dimensioning guidelines

    D. Tolerancing basics

    E. Surface finish notation

VIII. Overview of CAD applications - Comparison of Manual Drafting to CAD

 

All topics are covered in the lecture and lab portions of the course.

Assignments:

Lecture-Related Assignments:

1. Weekly reading assignments (1-5 pages)

2. Quiz(zes) (1-3)

3. Final exam

 

Lab-Related Assignments:

1. Linework and lettering exercises (2-5)

2. Manually drafted technical drawings (6-8)

 

Lecture- and Lab-Related Assignments:

1. Freehand drawing exercises (4-8)

2. Geometric construction exercises (5-10)

3. Orthographic and isometric projection sketches (5-10)

4. Basic CAD drawing(s) (1-2)

Methods of Evaluation/Basis of Grade.

Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.		Writing 0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments and skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.		Problem Solving 60 - 70%
Exercises; drawings; sketches
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.		Skill Demonstrations 5 - 10%
Quiz(zes)
Exams: All forms of formal testing, other than skill performance exams.		Exams 15 - 25%
Quiz(zes); final exam
Other: Includes any assessment tools that do not logically fit into the above categories.		Other Category 0 - 10%
Participation

Representative Textbooks and Materials:

Fundamentals of Modern Drafting. 2nd ed. Wallach, Paul Ross. Cengage Learning. 2014 (classic).

Instructor prepared materials

Print PDF