8/31/2024 8:19:49 PM |
| Changed Course |
CATALOG INFORMATION
|
Discipline and Nbr:
APTE 43 | Title:
COMPUTER ANIMATION |
|
Full Title:
Computer Modeling and Animation |
Last Reviewed:8/26/2024 |
Units | Course Hours per Week | | Nbr of Weeks | Course Hours Total |
Maximum | 3.00 | Lecture Scheduled | 2.00 | 17.5 max. | Lecture Scheduled | 35.00 |
Minimum | 3.00 | Lab Scheduled | 3.00 | 8 min. | Lab Scheduled | 52.50 |
| Contact DHR | 0 | | Contact DHR | 0 |
| Contact Total | 5.00 | | Contact Total | 87.50 |
|
| Non-contact DHR | 0 | | Non-contact DHR Total | 0 |
| Total Out of Class Hours: 70.00 | Total Student Learning Hours: 157.50 | |
Title 5 Category:
AA Degree Applicable
Grading:
Grade Only
Repeatability:
00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As:
Formerly:
APTECH 43
Catalog Description:
Untitled document
In this course, students will learn the fundamentals of three-dimensional (3D) modeling and animation using software such as Autodesk 3ds Max, Autodesk Maya, or Blender. Topics include: polygon and spline modeling, materials and texturing, keyframe and constraint-based animating, lighting, and rendering. Basic introductions to dynamic simulations, particle systems, character rigging, and character animation are also included.
Prerequisites/Corequisites:
Recommended Preparation:
Limits on Enrollment:
Schedule of Classes Information
Description:
Untitled document
In this course, students will learn the fundamentals of three-dimensional (3D) modeling and animation using software such as Autodesk 3ds Max, Autodesk Maya, or Blender. Topics include: polygon and spline modeling, materials and texturing, keyframe and constraint-based animating, lighting, and rendering. Basic introductions to dynamic simulations, particle systems, character rigging, and character animation are also included.
(Grade Only)
Prerequisites:
Recommended:
Limits on Enrollment:
Transfer Credit:CSU;UC.
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP
ARTICULATION, MAJOR, and CERTIFICATION INFORMATION
Associate Degree: | Effective: | | Inactive: | |
Area: | | |
|
CSU GE: | Transfer Area | | Effective: | Inactive: |
|
IGETC: | Transfer Area | | Effective: | Inactive: |
|
CSU Transfer: | Transferable | Effective: | Fall 1998 | Inactive: | |
|
UC Transfer: | Transferable | Effective: | Fall 2013 | Inactive: | |
|
C-ID: |
Certificate/Major Applicable:
Both Certificate and Major Applicable
COURSE CONTENT
Student Learning Outcomes:
At the conclusion of this course, the student should be able to:
Untitled document
1. Use animation and modeling software to produce three-dimensional (3D) models, scenes, and animations.
2. Create still-image and video renderings of 3D scenes.
Objectives:
Untitled document
At the conclusion of this course, the student should be able to:
1. Discuss 3D modeling and animation's role and usage
2. Effectively use 3D animation and modeling software applications
3. Analyze models and scenes
4. Create and edit 3D models and scenes
5. Assign bitmap and procedural materials to 3D objects
6. Set and adjust lighting and shadows
7. Establish and control environmental factors within 3D scenes
8. Animate movement and characteristics of objects, lights, and cameras
9. Create basic dynamic simulations, particle systems, and effects
10. Apply 3D rendering principles and procedures
Topics and Scope
Untitled document
I. Overview of the 3D Modeling and Animation Industry
A. Gaming
B. Film and television
C. Architecture, engineering, and construction
D. Advertising
E. Virtual Reality
F. Forensics
II. The Software Interface
A. Viewport navigation
B. Command panels
C. Time controls
D. Menus and toolbars
III. Analysis of 3D Models and Scenes
A. Component identification
B. Analysis of procedures
C. Evaluation of effectiveness
IV. Create and Edit 3D Models and Scenes
A. Polygonal modeling
B. Spline modeling
C. Model deformation
V. Material Creation and Assignment
A. Material editing interfaces
B. Mapping coordinates and parameters
C. Material and map types
D. Substance plug-ins
VI. Lighting and Shadow Creation and Adjustment
A. Light types
B. Free and target lighting
C. Ray-traced and shadow maps
D. Photometric lighting
VII. Environmental Factors within 3D Scenes
A. Environment maps
B. Environmental effects
C. Exposure control
VIII. Animating Objects, Lights, Cameras, and Controls
A. Keyframe animation
B. Constraint-based animation
C. Character animation basics
IX. Dynamic Simulations and Effects
A. Dynamics fundamentals
B. Basic particle systems
X. Rendering of 3D Objects and Animations
A. Render engines
B. Still image and video settings
The above Topics and Scope apply to both lecture and lab course components in an integrated format.
Assignments:
Untitled document
1. Project guide readings (20 - 26)
2. 3D modeling and animation projects (20 - 26)
3. Quizzes (2 - 4)
4. Final exam
Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing. | Writing 0 - 0% |
None | |
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments are more appropriate for this course. |
|
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills. | Problem Solving 65 - 80% |
3D modeling and animation projects | |
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams. | Skill Demonstrations 0 - 0% |
None | |
Exams: All forms of formal testing, other than skill performance exams. | Exams 20 - 30% |
Quizzes and final exam | |
Other: Includes any assessment tools that do not logically fit into the above categories. | Other Category 0 - 5% |
Participation | |
Representative Textbooks and Materials:
Untitled document
Autodesk Maya 2024 Basics Guide, Murdock, Kelly. SDC Publications. 2023.
The Complete Guide to Blender Graphics: Computer Modeling & Animation. 7th ed. Blain, John. A K Peters/CRC Press. 2022.
Instructor-prepared materials
Print PDF