9/1/2024 5:46:16 AM |
| New Course (First Version) |
CATALOG INFORMATION
|
Discipline and Nbr:
WELD 171.2 | Title:
MIG AND TIG WELDING |
|
Full Title:
Gas Metal Arc Welding and Gas Tungsten Arc Welding |
Last Reviewed:3/31/2014 |
Units | Course Hours per Week | | Nbr of Weeks | Course Hours Total |
Maximum | 2.00 | Lecture Scheduled | 1.00 | 17.5 max. | Lecture Scheduled | 17.50 |
Minimum | 2.00 | Lab Scheduled | 3.00 | 6 min. | Lab Scheduled | 52.50 |
| Contact DHR | 0 | | Contact DHR | 0 |
| Contact Total | 4.00 | | Contact Total | 70.00 |
|
| Non-contact DHR | 0 | | Non-contact DHR Total | 0 |
| Total Out of Class Hours: 35.00 | Total Student Learning Hours: 105.00 | |
Title 5 Category:
AA Degree Applicable
Grading:
Grade Only
Repeatability:
00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As:
Formerly:
Catalog Description:
Untitled document
All position welding utilizing Gas Metal Arc welding (MIG) and Gas Tungsten Arc welding (TIG). Welding certification testing included.
Prerequisites/Corequisites:
Course Completion of WELD 70
Recommended Preparation:
Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Schedule of Classes Information
Description:
Untitled document
All position welding utilizing Gas Metal Arc welding (MIG) and Gas Tungsten Arc welding (TIG). Welding certification testing included.
(Grade Only)
Prerequisites:Course Completion of WELD 70
Recommended:Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Transfer Credit:
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP
ARTICULATION, MAJOR, and CERTIFICATION INFORMATION
Associate Degree: | Effective: | | Inactive: | |
Area: | | |
|
CSU GE: | Transfer Area | | Effective: | Inactive: |
|
IGETC: | Transfer Area | | Effective: | Inactive: |
|
CSU Transfer: | | Effective: | | Inactive: | |
|
UC Transfer: | | Effective: | | Inactive: | |
|
C-ID: |
Certificate/Major Applicable:
Certificate Applicable Course
COURSE CONTENT
Outcomes and Objectives:
At the conclusion of this course, the student should be able to:
Untitled document
Upon completion of the course, students will be able to:
1. Demonstrate the ability to carry out safe welding practices.
2. Identify the five basic types of welding joints.
3. Set up and place in operation MIG and TIG equipment.
4. Identify filler metals by American Welding Society (A.W.S.) specifications.
5. Demonstrate welding in flat, horizontal, overhead and vertical positions.
6. Prepare plates for certification test in accordance with A.W.S. D 1.1 structure code.
7. Assemble gas tungsten/gas metal arc welding equipment for welding.
8. Identify common shielding gases for welding mild steel, stainless steel and aluminum with the gas metal arc welding process.
9. Utilize Plasma Arc equipment for cutting.
Topics and Scope
Untitled document
I. Gas Metal Arc (MIG)
A. MIG safety
B. Power sources
C. Shielding gases
D. Wire feeders
E. Guns and barrels
F. Consumable wire
G. Manipulative practice
II. Gas Tungsten Arc Welding (TIG)
A. TIG safety
B. Power sources
C. Torches
D. Shielding gases
E. Tungsten electrodes
F. Metal preparation
G. Filler rod
H. Manipulative practice
III. Plasma Arc Cutting
A. Plasma arc cutting safety
B. Power source
C. Torches and nozzles
D. Cutting gases metals
E. Ferrous and nonferrous metals
F. Cutting techniques
IV. Certification testing
Assignments:
Untitled document
1. Weekly reading assignments, 10-15 pages per week.
2. Homework problems, including safety handouts.
3. Welding skills assignments and certification tests.
4. Quizzes, Midterm, final exam.
Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing. | Writing 0 - 0% |
None | |
This is a degree applicable course but assessment tools based on writing are not included because skill demonstrations are more appropriate for this course. |
|
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills. | Problem Solving 10 - 20% |
Homework problems | |
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams. | Skill Demonstrations 50 - 60% |
Welding skills assignments and certification tests. | |
Exams: All forms of formal testing, other than skill performance exams. | Exams 10 - 20% |
Quizzes, Midterm, final exam | |
Other: Includes any assessment tools that do not logically fit into the above categories. | Other Category 0 - 10% |
Participation | |
Representative Textbooks and Materials:
Untitled document
Welding Skills, Processes and Practices for Entry Level Welders. Delmar Centage Learning, 2009
Instructor prepared materials
Print PDF