Printer Friendly Version
Recommended Course Sequence
|Mechatronics: Industrial Maintenance Technician Certificate
||Engineering and Applied Technology
Total Units: 19
The Mechatronics: Industrial Maintenance Technician Certificate of Achievement prepares individuals for employment as electro-mechanical maintenance technicians in high-tech manufacturing. Instruction is provided in the fundamentals of electronics, programmable logic controllers (PLCs), rotating machinery, and applied mathematics.
Upon successful completion of this program, the student will be able to:
- Identify and troubleshoot Programmable Logic Controllers (PLCs) program problems.
- Operate and maintain AC/DC motors, generators, and controllers.
- Understand safety codes and implement safety procedures applicable to usage of industrial equipment in an industrial working environment.
- Test, adjust, and troubleshoot various complex electronic circuits.
The requirements for the Mechatronics: Industrial Maintenance Technician Certificate program are:
Complete 19 units from
- Mechatronics: Industrial Maintenance Technician
|Mechatronics: Industrial Maintenance Technician - complete 19.00 units|
|ELEC 51A||Fundamentals of Electricity||3.00|
|ELEC 54A||Direct and Alternating Current Theory||3.00|
|ELEC 54B||Fundamentals of Electronic Devices||3.00|
|ELEC 64A||Electronic Construction 1||2.00|
|ELEC 153||Programmable Logic Controllers||3.00|
|ELEC 154||Rotating Machinery||3.00|
|Complete any combination totaling at least 2.00 units from the following:|
|DET 184||Mobile Hydraulic Systems||3.00|
|MACH 51.1A||Beginning Machine Tool Technology||3.00|
|WEOC 99||Occupational Work Experience||0.50-8.00|
|WEOC 99I||Internship Occupational Work Experience||0.50-8.00|
|WELD 101||Introduction to Shielded Metal Arc Welding (SMAW)||2.00|
The requirements for this program of study are effective beginning the semester shown above. If you began working on this program before the effective semester, you may not be affected by the changes. Consult with the program contact person or the department chair to determine your eligibility to complete the program under previous requirements.
Course Prerequisites and Advisories:
Courses in a program of study may have prerequisites or advisories;
that is, courses that must or should be completed before taking that course.
Please check for prerequisites or advisories by clicking on the course numbers
in the Program Requirements section.