SRJC Course Outlines

7/31/2021 1:54:47 AMCS 78.1A Course Outline as of Spring 2019

New Course (First Version)
CATALOG INFORMATION

Discipline and Nbr:  CS 78.1ATitle:  MAKE IT WITH 3D PRINTING  
Full Title:  Make It with 3D Printing
Last Reviewed:9/24/2018

UnitsCourse Hours per Week Nbr of WeeksCourse Hours Total
Maximum1.50Lecture Scheduled3.008 max.Lecture Scheduled24.00
Minimum1.50Lab Scheduled1.004 min.Lab Scheduled8.00
 Contact DHR0 Contact DHR0
 Contact Total4.00 Contact Total32.00
 
 Non-contact DHR0 Non-contact DHR Total0

 Total Out of Class Hours:  48.00Total Student Learning Hours: 80.00 

Title 5 Category:  AA Degree Applicable
Grading:  Grade or P/NP
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly: 

Catalog Description:
Untitled document
Learn where to find 3D models and turn them into physical objects using a variety of 3D printers. Includes learning about the features and abilities of 3D printers and the software and hardware used for 3D printing.

Prerequisites/Corequisites:


Recommended Preparation:
Eligibility for ENGL 100 or ESL 100

Limits on Enrollment:

Schedule of Classes Information
Description: Untitled document
Learn where to find 3D models and turn them into physical objects using a variety of 3D printers. Includes learning about the features and abilities of 3D printers and the software and hardware used for 3D printing.
(Grade or P/NP)

Prerequisites:
Recommended:Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Transfer Credit:CSU;
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:Effective:Inactive:
 Area:
 
CSU GE:Transfer Area Effective:Inactive:
 
IGETC:Transfer Area Effective:Inactive:
 
CSU Transfer:TransferableEffective:Spring 2019Inactive:
 
UC Transfer:Effective:Inactive:
 
C-ID:

Certificate/Major Applicable: Both Certificate and Major Applicable

Approval and Dates
Version:01Course Created/Approved: 9/24/2018
Version Created:8/21/2018Course Last Modified:3/22/2021
Submitter:Donald LairdCourse Last Full Review:9/24/2018
Version Status:Approved New Course (First Version)Prereq Created/Approved:9/24/2018
Version Status Date:9/24/2018Semester Last Taught:Fall 2019
Version Term Effective:Spring 2019Term Inactive:


COURSE CONTENT

Student Learning Outcomes:
Upon completion of the course, students will be able to:
Untitled document
1.  Find and download existing 3D models.
2.  Print objects on a selection of 3D printers.
 

Objectives: Untitled document
Upon completion of the course, students will be able to:
1. Locate existing 3D models to meet project requirements.
2. Identify 3D printer parts and components.
3. Work with slicing software.
4. Operate 3D printers.

Topics and Scope
Untitled document
I. Understanding 3D Printing
    A. Hardware
         1. Filament
         2. Types of 3D printers
         3. 3D printer components
    B. Software
         1. File formats
         2. Slicing software
II.   Locating Pre-Built 3D Models
III.  Configuring and Using Slicing Software
IV. Printing 3D Objects
    A. Proper filament selection
    B. Safety
    C. Operating procedures
 
All topics are covered in the lecture and lab portions of the course.

Assignments:
Untitled document
Lecture-Related Assignments:
1. Weekly assignments (3 - 5)
2. Terminology glossary
3. One final exam

Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.Writing
0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.Problem Solving
0 - 0%
None
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.Skill Demonstrations
60 - 70%
Weekly assignments, glossary assignment
Exams: All forms of formal testing, other than skill performance exams.Exams
30 - 30%
Final exam
Other: Includes any assessment tools that do not logically fit into the above categories.Other Category
0 - 10%
Attendance and participation


Representative Textbooks and Materials:
Untitled document
Getting Started with 3D Printing: A Hands-on Guide to the Hardware, Software, and Services That Make the 3D Printing Ecosystem. 2nd ed. Kloski, Liza and Kloski, Nick. Maker Media. 2018

OTHER REQUIRED ELEMENTS

Student Preparation
 Matric Assessment Required:ERequires English Assessment
 Prerequisites-generate description:NPNo Prerequisite
 Advisories-generate description:AAuto-Generated Text
 Prereq-provisional:NNO
 Prereq/coreq-registration check:NNo Prerequisite Rules Exist
 Requires instructor signature:NInstructor's Signature Not Required
   
BASIC INFORMATION, HOURS/UNITS & REPEATABILITY
 Method of instruction:02Lecture
 04Laboratory
 Area department:CSComputer Studies
 Division:72Arts & Humanities
 Special topic course:NNot a Special Topic Course
 Program Status:1Both Certificate and Major Applicable
 Repeatability:00Two Repeats if Grade was D, F, NC, or NP
 Repeat group id: CS 781 781A
   
SCHEDULING
 Audit allowed:YAuditable
 Open entry/exit:NNot Open Entry/Open Exit
 Credit by Exam:NCredit by examination not allowed
 Budget code: Program:0000Unrestricted
 Budget code: Activity:0701Computer & Information Science
   
OTHER CODES
Disciplines:Computer Information Systems
 Basic Skills:NNot a Basic Skills Course
 Level below transfer:YNot Applicable
 CVU/CVC status:NNot Distance Ed
 Distance Ed Approved:N
 Emergency Distance Ed Approved:N
 Non-credit category:YNot Applicable, Credit Course
 Classification:YCareer-Technical Education
 SAM classification:CClearly Occupational
 TOP code:0702.00Computer Information Systems
 Work-based learning:NDoes Not Include Work-Based Learning
 DSPS course:NNO
 In-service:NNot an in-Service Course
 Lab Tier:21Credit Lab - Tier 1

Print PDF