SRJC Course Outlines

12/8/2024 1:25:53 PMWELD 71 Course Outline as of Fall 2018

Inactive Course
CATALOG INFORMATION

Discipline and Nbr:  WELD 71Title:  WELDING BASICS: INTERM  
Full Title:  Welding Basics: Intermediate
Last Reviewed:3/12/2012

UnitsCourse Hours per Week Nbr of WeeksCourse Hours Total
Maximum2.00Lecture Scheduled1.0017.5 max.Lecture Scheduled17.50
Minimum2.00Lab Scheduled3.006 min.Lab Scheduled52.50
 Contact DHR0 Contact DHR0
 Contact Total4.00 Contact Total70.00
 
 Non-contact DHR0 Non-contact DHR Total0

 Total Out of Class Hours:  35.00Total Student Learning Hours: 105.00 

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly:  WELD 70B

Catalog Description:
Untitled document
All-position arc welding, certifications, heli-arc, M.I.G. and fabrication techniques. Emphasis on projects and repairs.

Prerequisites/Corequisites:
Course Completion of WELD 70


Recommended Preparation:
Eligibility for ENGL 100 or ESL 100

Limits on Enrollment:

Schedule of Classes Information
Description: Untitled document
All-position arc welding, certifications, heli-arc, M.I.G. and fabrication techniques. Emphasis on projects and repairs.
(Grade Only)

Prerequisites:Course Completion of WELD 70
Recommended:Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Transfer Credit:
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:Effective:Inactive:
 Area:
 
CSU GE:Transfer Area Effective:Inactive:
 
IGETC:Transfer Area Effective:Inactive:
 
CSU Transfer:Effective:Inactive:
 
UC Transfer:Effective:Inactive:
 
C-ID:

Certificate/Major Applicable: Certificate Applicable Course



COURSE CONTENT

Outcomes and Objectives:
At the conclusion of this course, the student should be able to:
Untitled document
Upon completion of this course, the student will be able to:
1.   Demonstrate the ability to carry out safe welding practices.
2.   Identify the five basic types of welding joints.
3.   Prepare a sample of cast iron for welding.
4.   Set up and place in operation arc, oxy-acetylene, gas
    tungsten and gas metal arc welding equipment.
5.   Demonstrate air arc principles.
6.   Identify filler metals by American Welding Society (A.W.S.D.) specifications.
7.   Demonstrate welding in flat, horizontal and vertical postions.
8.   Prepare plates for certification test in accordance with A.W.S.D. 1.1 structure code.
9.   Describe the metal surfacing processing.
10.  Discuss the reasons for preheating in welding.
11.  Assemble gas tungsten/gas metal arc welding equipment for welding.
12.  Identify common sheilding gasses for welding mild steel,
       stainless steel and aluminum with the gas metal arc welding process.
13.  Demonstrate ability to weld in all positions with shielded metal arc, gas metal arc.
 
Repeating students will:
1. Demonstrate greater technical achievement in one or more welding techniques.
2. Perform welds with higher standards of appearance and strength.
3. Demonstrate greater skill in controlling molten metal.

Topics and Scope
Untitled document
I.     Shielded Metal Arc
      A.  Arc welding safety
      B.  Fillet welds, flat position
      C.  Fillet welds, vertical position
      D.  Single V-butt joints, flat, horizontal, and vertical positions
      E.  Welding cast iron
      F.  Hardfacing
      G.  Manipulative practice
II.    Oxy-Acetylene
      A.  Oxy-acetylene safety
      B.  Butt and lap joints, horizontal position
      C.  Butt and lap joints, vertical position
      D.  Brazing cast iron
      E.  Case hardening
      F.  Hardfacing
      G.  Automatic flame cutting
      H.  Preheating and post-heating
      I.  Manipulative practice
III.   Gas Metal Arc (MIG)
      A.  Mig safety
      B.  Power sources
      C.  Shielding gases
      D.  Wire feeders
      E.  Guns and barrels
      F.  Consumable wire
      G.  Manipulative practice
IV.    Gas Tungsten Arc Welding (TIG)
      A.  Tig safety
      B.  Power sources
      C.  Torches
      D.  Sheilding gases
      E.  Tungsten electrodes
      F.  Metal preparation
      G.  Filler rod
      H.  Manipulative practice
V.     Air Arc Cutting
      A.  Arc cutting safety
      B.  Equipment
      C.  Carbon electrodes
      D.  Machine settings
      E.  Manipulative practice
VI.    Flame Cutting
      A.  Flame cutting safety
      B.  Manual
      C.  Automatic
      D.  Torches and tips
      E.  Gas pressure settings
      F.  Torch manipulation
      G.  Manipulative practice
VII.   Metal Surfacing
      A.  Wear problems
      B.  Material selection
      C.  Process selection
      D.  Metal spraying
      E.  Case hardening
VIII.  Plasma Arc Cutting
      A.  Plasma arc cutting safety
      B.  Power source
      C.  Torches and nozzles
      D.  Cutting gases metals
      E.  Ferrous and nonferrous metals
      F.  Cutting techniques
IX.  With Repeat
     A. Greater technical achievement in one or more welding techniques
     B. Welds with higher standards of appearance and strenght
     C. Greater skill in controlling molten metal

Assignments:
Untitled document
1. Weekly reading assignments, 10-15 pages per week (including handouts developed by instructor and from manufacturers).
2. Regular quizzes based on reading.
3. Welding skills assignments and performance exams.  
4. Homework problems, including safety handouts.
5. Midterm; final exam.
 
With repeat:
1. Skill demonstrations: greater technical achievement in one or more welding techniques.
2. Skill demonstrations: perform welds with higher standards of appearance and strength.
3. Skill demonstrations: greater skill in controlling molten metal.

Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.Writing
0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.Problem Solving
10 - 20%
Homework problems (handouts).
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.Skill Demonstrations
50 - 60%
Welding skills assignments and performance exams.
Exams: All forms of formal testing, other than skill performance exams.Exams
10 - 20%
Quizzes and final exam: Multiple choice, True/false, Matching items, Completion
Other: Includes any assessment tools that do not logically fit into the above categories.Other Category
0 - 10%
Attendance


Representative Textbooks and Materials:
Untitled document
Jeffus, Larry et al. Welding Skills, Processes and Practices for Entry-Level Welders. Delmar Cengage Learning, 2009.
Instructor prepared materials

Print PDF