SRJC Course Outlines

3/28/2024 12:57:25 PMDET 181 Course Outline as of Fall 2020

Changed Course
CATALOG INFORMATION

Discipline and Nbr:  DET 181Title:  PREVENT. MAINT. & INSPC.  
Full Title:  Preventive Maintenance and Inspection
Last Reviewed:12/9/2019

UnitsCourse Hours per Week Nbr of WeeksCourse Hours Total
Maximum3.00Lecture Scheduled2.2517.5 max.Lecture Scheduled39.38
Minimum3.00Lab Scheduled2.258 min.Lab Scheduled39.38
 Contact DHR0 Contact DHR0
 Contact Total4.50 Contact Total78.75
 
 Non-contact DHR0 Non-contact DHR Total0

 Total Out of Class Hours:  78.75Total Student Learning Hours: 157.50 

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly:  DET 81

Catalog Description:
Untitled document
The study of preventive maintenance and inspection practices as related to diesel powered vehicles and machinery. Preventive maintenance inspections are practiced.

Prerequisites/Corequisites:
Course Completion of DET 179, DET 182A, DET 182B, DET 184, DET 185, DET 188, DET 189; AND Course Completion or Current Enrollment in IED 190, AUTO 120, and AUTO 126


Recommended Preparation:
Eligibility for ENGL 100 or ESL 100 or equivalent

Limits on Enrollment:

Schedule of Classes Information
Description: Untitled document
The study of preventive maintenance and inspection practices as related to diesel powered vehicles and machinery. Preventive maintenance inspections are practiced.
(Grade Only)

Prerequisites:Course Completion of DET 179, DET 182A, DET 182B, DET 184, DET 185, DET 188, DET 189; AND Course Completion or Current Enrollment in IED 190, AUTO 120, and AUTO 126
Recommended:Eligibility for ENGL 100 or ESL 100 or equivalent
Limits on Enrollment:
Transfer Credit:
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:Effective:Inactive:
 Area:
 
CSU GE:Transfer Area Effective:Inactive:
 
IGETC:Transfer Area Effective:Inactive:
 
CSU Transfer:Effective:Inactive:
 
UC Transfer:Effective:Inactive:
 
C-ID:

Certificate/Major Applicable: Both Certificate and Major Applicable



COURSE CONTENT

Student Learning Outcomes:
At the conclusion of this course, the student should be able to:
Untitled document
1.  Perform maintenance inspections on agricultural, construction, public transportation and
    trucking equipment.
2.  Evaluate equipment condition and determine repair options.
 

Objectives: Untitled document
At the conclusion of this course, the student should be able to:
1. Describe maintenance and inspection procedures for diesel powered equipment.
2. Evaluate symptoms of potential machine failure.
3. Perform and assess preventive maintenance inspections on the following:
    a. tracks, tires and wheels
    b. engine and powertrain components
    c. electrical/electronic components
    d. chassis and undercarriage components.
4. Evaluate conditions and determine repair options.
5. Utilize digital media for service information.
6. Discuss and apply personal, shop, and environmental safety procedures.

Topics and Scope
Untitled document
I. Maintenance and Inspection Procedures
    A. Scheduled maintenance
    B. Preventive maintenance
II. Using Technical Manuals
    A. Hard copy
    B. Computerized
    C. Service bulletins
III. Regulations for Different Industries
    A. Department of Transportation (DOT)
    B. Federal Railroad Administration (FRA)
    C. Society of Automotive Engineers (SAE)
IV. Lubrication
    A. Solid and liquid lubricants
    B. Lubrication procedures
    C. Rating symbols
V. Failure Analysis
    A. Metallic parts failures
    B. Failures due to neglect/lack of maintenance
VI. Tracks, Tires and Wheels
    A. Condition and wear
    B. Rims, wheels, rollers
VII. Engine Compartment
    A. Fluid levels
    B. Leak inspection
    C. Belts and hoses
    D. Component mounting
    E. Wiring and clamps
    F. Air intake system
    G. Fuel systems
    H. Cooling systems
VIII. Electrical and Electronic systems
    A. Inspect/test batteries
    B. Battery cables and terminals
    C. Starting system tests
    D. Lighting system check
    E. Gauges and instruments
    F. Diagnostic display
    G. Computer malfunction lamp diagnosis
IX. Power Train
    A. Transmission service
    B. Rear axle service
    C. Driveline inspection
    D. Clutch adjustment
X. Chassis/Undercarriage
    A. Steering system
    B. Suspension inspection
    C. Brake adjustment and inspection
    D. Anti-lock brake malfunction diagnosis
    E. Springs and attachments
    F. Component mounts
XI. Hydraulic Systems
    A. Fluid type and level indicators
    B. Filters and maintenance
XII. Safety
    A. Personal
    B. Shop
    C. Environmental/hazardous material handling
 
All topics are covered in both the lecture and lab parts of the course.

Assignments:
Untitled document
Lecture-Related Assignments:
1. Read 25 to 50 pages per week
2. Ten to fifteen tests including final exam
 
Lab-Related Assignments:
1. Perform preventive maintenance inspections and prepare written reports
2. Complete inspection and evaluation worksheets
3. Complete National Automotive Technicians Education Foundation (NATEF) recommended
    task sheets
4. Daily work logs (work assigned, work completed)

Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.Writing
0 - 25%
Daily work logs; Written inspection report
This is a degree applicable course but assessment tools based on writing are not included because skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.Problem Solving
10 - 25%
Inspection and evaluation worksheets and NATEF task sheets
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.Skill Demonstrations
20 - 40%
Perform preventive maintenance inspections
Exams: All forms of formal testing, other than skill performance exams.Exams
30 - 50%
Tests including final exam
Other: Includes any assessment tools that do not logically fit into the above categories.Other Category
0 - 0%
None


Representative Textbooks and Materials:
Untitled document
Fundamentals of Mobile Heavy Equipment. Wright, Gus and Duffy, Owen and Heard, Scott. Jones and Bartlett. 2019
Fundamentals of Medium/Heavy Duty Commercial Vehicle Systems. Duffy, Owen and Wright, Gus. Jones and Bartlett. 2016
Instructor prepared materials

Print PDF