12/22/2024 3:48:29 AM	AUTO 56 Course Outline as of Fall 2006	Changed Course
CATALOG INFORMATION
Discipline and Nbr:  AUTO 56	Title:  AUTO ELECTRIC SYSTEM
Full Title:  Automotive Electrical System
Last Reviewed:5/12/2008

Units		Course Hours per Week			Nbr of Weeks	Course Hours Total
Maximum	4.00	Lecture Scheduled	3.00		17.5 max.	Lecture Scheduled	52.50
Minimum	4.00	Lab Scheduled	3.00		17.5 min.	Lab Scheduled	52.50
		Contact DHR	0			Contact DHR	0
		Contact Total	6.00			Contact Total	105.00
		Non-contact DHR	0			Non-contact DHR Total	0

Total Out of Class Hours:  105.00

Total Student Learning Hours: 210.00

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly: 

Catalog Description:

Theories of design and operation of automotive electrical and electronic systems; techniques of troubleshooting, service, and repair of starting, charging, and other chassis electrical systems. Introduction to computer controlled systems. Prepare students to take the A.S.E. (Automotive Service Excellent) Engine Repair Certification.

Prerequisites/Corequisites:

Recommended Preparation:
Course Eligibility for ENGL 100 OR Course Eligibility for ENGL 100A OR Course Eligibility for EMLS 100 ( or ESL 100)

Limits on Enrollment:

Schedule of Classes Information
Description:

Theories of design and operation of automotive electrical and electronic systems; techniques of troubleshooting, service, and repair of starting, charging, and other chassis electrical systems. Introduction to computer controlled systems. Prepare students to take the A.S.E. (Automotive Service Excellence) Engine Repair Certification.

(Grade Only)
Prerequisites:
Recommended:Course Eligibility for ENGL 100 OR Course Eligibility for ENGL 100A OR Course Eligibility for EMLS 100 ( or ESL 100)
Limits on Enrollment:
Transfer Credit:CSU;
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:		Effective:		Inactive:
Area:
CSU GE:	Transfer Area			Effective:	Inactive:
IGETC:	Transfer Area			Effective:	Inactive:
CSU Transfer:	Transferable	Effective:	Spring 1989	Inactive:	Spring 2016
UC Transfer:		Effective:		Inactive:
C-ID:

Certificate/Major Applicable: Both Certificate and Major Applicable

COURSE CONTENT

Outcomes and Objectives:
At the conclusion of this course, the student should be able to:

Upon completion of this course, students will be able to:

1. Explain theories of automotive electrical and electronic systems design

  and operation.

2. Apply the principles of electricity to evaluation and repair of common

  automotive electrical systems.

3. Differentiate among types of electrical circuits.

4. Utilize a variety of types of electrical test equipment to diagnose

  electrical system problems.

5. Troubleshoot electrical circuits.

6. Diagnose electrical system problems using electrical system schematics.

7. Test, evaluate and repair common electrical systems.

8. Explain the requirements and processes for obtaining A.S.E. (Automotive

  Service Excellence) Auto Electrical System Certification and B.A.R.

 (Bureau of Automotive Repair) Lamp Adjuster Certification.

9. Demonstrate eligibility to enter the automotive trade as an apprentice

  level technician specializing in automotive electrical systems.

Topics and Scope

1. Theories of Automotive Electrical and Electronic Systems

  a. Design

  b. Operation

2. Principles of electricity

  a. Conductors

  b. Semiconductors

  c. Magnetism

  d. Reluctance

3. Electrical and Circuit Theory

  a. Ohm's Law

  b. Kirchoff's Law

  c. Types of circuits

4. Safety

  a. Safety equipment/apparel

  b. Automobile environment

  c. Use of equipment

  d. First aid

5. Electronic fundamentals

  a. Types of components

  b. Operation

  c. Damage prevention

6. Types of test equipment

  a. Test lights

  b. Meters

  c. Oscilloscopes

7. Troubleshooting electrical circuits

  a. Wires

  b. Switches

  c. Fuses

  d. Diagnosis using electrical schematics

  e. Repair Techniques

8. Batteries

  a. Safety considerations

  b. Construction and operation

  c. Testing

9. Starters

  a. Types

  b. Operating circuits

  c. Diagnosis

  d. Overhaul procedures

10. Charging systems

  a. Principles

  b. Generators

  c. Alternators

  d. Regulators

  e. Testing

11. Lighting systems

12. Instrument cluster and gauges

13. Accessory systems

  a. HVAC

  b. Windshield wipers and washers

  c. Horn

  d. Cruise control

  e. Power windows

  f. Power seats

  g. Audio systems

14. Ignition systems

  a. Points/condenser

  b. Ignition coil operation

  c. Electronic ignition

  d. Computer controlled

  e. Testing

15. Computer fundamentals

  a. Operation

  b. Sensors

  c. Actuators

  d. Carburetor controls

  e. Fuel injection

  f. Emission control devices

16. Preparing for certification exams

  a. A.S.E. (Automotive Service Excellence) Electrical System

     Certification Exam

  b. B.A.R. (Bureau of Automotive Repair) Lamp Adjuster Exam

Assignments:

1. Students will be required to keep a notebook of all class assignments

and class notes that will be graded for completeness and organization.

2. Class performances and performance exams: In the lab, students will be

evaluated on their ability to follow industry approved diagnostic and

repair procedures in a reasonable amount of time.

3. Electrical circuit and component identification.

4. Lab reports: Complete work orders, diagnostic sheets, parts orders, and

time sheets correctly and in a neat and readable manner.

5. Reading: 50 pages per week.

6. Three unit exams, midterm, final exam.

Methods of Evaluation/Basis of Grade.

Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.		Writing 0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments and skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.		Problem Solving 5 - 20%
Lab reports
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.		Skill Demonstrations 30 - 50%
Class performances, Performance exams, Component identification
Exams: All forms of formal testing, other than skill performance exams.		Exams 30 - 50%
Multiple choice, True/false
Other: Includes any assessment tools that do not logically fit into the above categories.		Other Category 10 - 15%
Notebook, Attendance and Participation.

Representative Textbooks and Materials:

Diagnosis and Troubleshooting of Automotive Electrical, Electronic, and

Computer Systems, James D. Halderman, Prentice Hall, 3rd Ed 2001.

Print PDF