12/27/2024 2:28:37 AM	APED 222.7 Course Outline as of Summer 2025	Changed Course
CATALOG INFORMATION
Discipline and Nbr:  APED 222.7	Title:  APP ELECTRICIANS 7TH SEM
Full Title:  Apprentice Electricians, Seventh Semester
Last Reviewed:3/28/2022

Units		Course Hours per Week			Nbr of Weeks	Course Hours Total
Maximum	4.00	Lecture Scheduled	3.00		17.5 max.	Lecture Scheduled	52.50
Minimum	4.00	Lab Scheduled	0		4 min.	Lab Scheduled	0
		Contact DHR	3.00			Contact DHR	52.50
		Contact Total	6.00			Contact Total	105.00
		Non-contact DHR	0			Non-contact DHR Total	0

Total Out of Class Hours:  105.00

Total Student Learning Hours: 210.00

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly:  APED 220.7

Catalog Description:

Students will be introduced to training related to electrician indentured apprenticeship. This is the seventh semester of a ten-semester program.

Prerequisites/Corequisites:

Recommended Preparation:
Course Completion of APED 220.6

Limits on Enrollment:
Indentured apprentice - apply and be accepted by the Redwood Empire Joint Apprenticeship & Training Committee (REJATC)

Schedule of Classes Information
Description:

Students will be introduced to training related to electrician indentured apprenticeship. This is the seventh semester of a ten-semester program.

(Grade Only)
Prerequisites:
Recommended:Course Completion of APED 220.6
Limits on Enrollment:Indentured apprentice - apply and be accepted by the Redwood Empire Joint Apprenticeship & Training Committee (REJATC)
Transfer Credit:
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:		Effective:		Inactive:
Area:
CSU GE:	Transfer Area			Effective:	Inactive:
IGETC:	Transfer Area			Effective:	Inactive:
CSU Transfer:		Effective:		Inactive:
UC Transfer:		Effective:		Inactive:
C-ID:

Certificate/Major Applicable: Certificate Applicable Course

COURSE CONTENT

Student Learning Outcomes:
At the conclusion of this course, the student should be able to:

1. Describe and demonstrate electrical principles and regulations related to electricians' trade.

2. Apply best practices in practical environment related to electricians' trade.

 

Objectives:

At the conclusion of this course, the student should be able to:

1. Describe and explain the functions of basic lightning protection systems, components, and devices.

2. Explain control devices and applications for building electrical, lighting, and Heating, Ventilation, and Air Conditioning (HVAC) system automation.

3. Explain and demonstrate system integration with open protocols for using Building Automation Control network (BACnet) services.

4. Describe and demonstrate knowledge of basic lighting components and functions.

5. Explain the basic concepts of motor control.

6. Identify Alternating Current (AC) alternators, three-phase, and squirrel-cage motors.

7. Demonstrate knowledge of different types of motors, generators, motor and circuit protection, and overload protection.

8. Identify and demonstrate knowledge of different motor components, systems, and troubleshooting techniques.

Topics and Scope

I. Lightning Protection, Level I

    A. Lightning protection systems introduction

    B. Lightning protection systems - ground work

    C. Down conductors and bonding

    D. Rooftops

    E. Concealed and structural steel systems

    F. Bonding requirements and potential equalization

    G. Surge protection devices

II. Building Automation 1: Control Devices and Applications, Level I

    A. Introduction to building automation

    B. Electrical systems

    C. Lighting sources and controls

    D. Lighting system control devices

    E. HVAC systems

    F. HVAC system applications

    G. Automated building operation and applications

III. Building Automation 2: System Integration with Open Protocols, Level I B

    A. Building automation interoperability

    B. Control concepts

    C. Communication fundamentals

    D. Introduction to BACnet

    E. BACnet transports and interworking

    F. BACnet objects and services

    G. BACnet alarming, scheduling, and trending

    H. BACnet special applications

    I. BACnet installation, configuration, and troubleshooting

IV. Lighting Essentials, Level I

     A. Basic concepts in lighting

    B. The science of light

    C. Qualities of light sources

    D. Daylighting

    E. Lamps

    F. Luminaires

    G. Lighting controls

    H. Quantity and quality of light

V. Motor Control, Level I

    A. Introduction to motor control

VI. Motors, Level I

     A. Magnetism and induction

    B. Motor nameplates

    C. AC alternators

    D. Three-Phase motors

    E. Squirrel-Cage motors

VII. Motors, Level II, Based on the Current NEC  

     A. Wound-Rotor motors

    B. Single-Phase motors

    C. Motor protection

    D. Direct Current (DC) motors and generators

    E. Starting

    F. Motor branch circuits

    G. Motor branch-circuit protection

    H. Motor Overload Protection

    I. Sizing motor disconnect

VIII. Motors, Level III

     A. Synchronous motors

    B. Braking

    C. Multispeed motors

    D. Adjustable-Speed drives

    E. Bearings

    F. Drive systems and clutches

    G. Motor alignment

    H. Troubleshooting motors

    I. Special-Application motors

Assignments:

1. Homework assignments (1-2 sets per week)

2. Quizzes and examinations (4-6 per semester)

3. Class performances and field work (on-the-job demonstrations) of skill development, safety practices, equipment, and material handling

Methods of Evaluation/Basis of Grade.

Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.		Writing 0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments and skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.		Problem Solving 10 - 25%
Homework assignments; field work
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.		Skill Demonstrations 50 - 65%
Class performances; field work
Exams: All forms of formal testing, other than skill performance exams.		Exams 10 - 20%
Quizzes and examination
Other: Includes any assessment tools that do not logically fit into the above categories.		Other Category 5 - 10%
Attendance and participation

Representative Textbooks and Materials:

Building Automation: Control Devices and Applications Textbook  Catalog Order No: S158 in the Electrical Training Alliance 2020 Training Essentials Catalog. National Joint Apprenticeship and Training Committee for the Electrical Industry. 2008 (classic) 

Building Automation: System Integration with Open Protocols Textbook Catalog Order No: S519 in the Electrical Training Alliance 2020 Training Essentials Catalog. National Joint Apprenticeship and Training Committee for the Electrical Industry. 2009 (classic) 

Lighting Design Basics Textbook Catalog Order No: S699 in the Electrical Training Alliance 2020 Training Essentials Catalog. National Joint Apprenticeship and Training Committee for the Electrical Industry. 2017

Motors Textbook Catalog Order No: S649 in the Electrical Training Alliance 2020 Training Essentials Catalog. National Joint Apprenticeship and Training Committee for the Electrical Industry. 2010 (classic) 

Code Calculations Textbook Catalog Order No: S00820 in the Electrical Training Alliance 2020 Training Essentials Catalog. National Joint Apprenticeship and Training Committee for the Electrical Industry.  2020

National Fire Protection Association 70 National Electrical Code - 2020 Handbook Catalog Order No: S1050 in the Electrical Training Alliance 2020 Training Essentials Catalog. Delmar Cengage Learning.  2020

Print PDF