11/21/2024 10:52:08 AM |
| Changed Course |
CATALOG INFORMATION
|
Discipline and Nbr:
HORT 91 | Title:
LANDSCAPE CONST/ESTIM |
|
Full Title:
Landscape Construction/Estimation |
Last Reviewed:4/26/2021 |
Units | Course Hours per Week | | Nbr of Weeks | Course Hours Total |
Maximum | 3.00 | Lecture Scheduled | 2.00 | 17.5 max. | Lecture Scheduled | 35.00 |
Minimum | 3.00 | Lab Scheduled | 3.00 | 6 min. | Lab Scheduled | 52.50 |
| Contact DHR | 0 | | Contact DHR | 0 |
| Contact Total | 5.00 | | Contact Total | 87.50 |
|
| Non-contact DHR | 0 | | Non-contact DHR Total | 0 |
| Total Out of Class Hours: 70.00 | Total Student Learning Hours: 157.50 | |
Title 5 Category:
AA Degree Applicable
Grading:
Grade or P/NP
Repeatability:
00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As:
Formerly:
Catalog Description:
Untitled document
Introduction to the field of landscape contracting, including cost estimating and bidding procedures. Course includes hands-on experience with tools, materials, and methods used in the construction of wood and simple concrete and masonry landscape features. This course also prepares students for the C-27 landscape contractor's licensing exam and national industry certification. This course requires students to: walk, stand, crouch for long periods of time and carry out strenuous physical tasks; work with hand tools, power tools, and landscape materials; work outdoors in various conditions including heat, humidity, rain, dust, noise, and cold; and lift up to 50 pounds repeatedly within a 3 hour period.
Prerequisites/Corequisites:
Recommended Preparation:
Eligibility for ENGL 100 OR EMLS 100 (formerly ESL 100) or equivalent
Limits on Enrollment:
Schedule of Classes Information
Description:
Untitled document
Introduction to the field of landscape contracting, including cost estimating and bidding procedures. Course includes hands-on experience with tools, materials, and methods used in the construction of wood and simple concrete and masonry landscape features. This course also prepares students for the C-27 landscape contractor's licensing exam and national industry certification. This course requires students to: walk, stand, crouch for long periods of time and carry out strenuous physical tasks; work with hand tools, power tools, and landscape materials; work outdoors in various conditions including heat, humidity, rain, dust, noise, and cold; and lift up to 50 pounds repeatedly within a 3 hour period.
(Grade or P/NP)
Prerequisites:
Recommended:Eligibility for ENGL 100 OR EMLS 100 (formerly ESL 100) or equivalent
Limits on Enrollment:
Transfer Credit:CSU;
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP
ARTICULATION, MAJOR, and CERTIFICATION INFORMATION
Associate Degree: | Effective: | | Inactive: | |
Area: | | |
|
CSU GE: | Transfer Area | | Effective: | Inactive: |
|
IGETC: | Transfer Area | | Effective: | Inactive: |
|
CSU Transfer: | Transferable | Effective: | Fall 2004 | Inactive: | |
|
UC Transfer: | | Effective: | | Inactive: | |
|
C-ID: |
Certificate/Major Applicable:
Both Certificate and Major Applicable
COURSE CONTENT
Student Learning Outcomes:
At the conclusion of this course, the student should be able to:
Untitled document
1. Interpret landscape plans; select lumber, tools, materials and estimate the costs for a construction project.
2. Design basic masonry landscape features and select materials for construction.
3. Demonstrate the necessary skills for successful performance on the C-27 landscape contractor's licensing exam.
Objectives:
Untitled document
At the conclusion of this course, the student should be able to:
1. Evaluate careers in the landscape industry.
2. Describe C-27 licensing requirements.
3. Interpret landscape plans in order to construct a specific landscape element.
4. Select lumber, tools, and materials for basic landscape construction projects.
5. Estimate the cost of materials and labor for basic landscape construction projects.
6. Describe the various materials that can be used to construct a fence.
7. Design basic wood landscape features.
8. Calculate riser to tread ratios for step construction.
9. Construct a simple wood landscape structure.
10. Mix, pour, and finish concrete to form a patio or walkway landscape feature.
11. Compare alternate pavings for patio and walkway areas.
12. Estimate the cost of materials for simple concrete and masonry landscape features.
13. Design basic masonry landscape features and select materials for construction.
14. Construct a simple landscape feature using brick or paving materials.
Topics and Scope
Untitled document
I. Introduction
II. Scope of the Landscaping Contracting Industry
A. Professions
B. Scope of work
III. California State Contractors Laws, Rules, and Regulations
A. Licensing
B. C-27 exam
C. Fees
D. Requirements
E. Scope of license
F. Exemptions
IV. Estimating Procedures
V. Lumber and its uses
VI. Fence Design
A. Purpose
B. Construction elements
1. Post & rail spacing
2. Footings
3. Fasteners
C. Styles
VII. Gate Design
A. Relationship to the fence
B. Frame construction
C. Hardware/fasteners
D. Hanging techniques
VIII. Deck Design
A. Purpose
B. Construction elements
C. Ground level vs. raised (comparisons)
D. Decking options
E. Fastener options
IX. Garden Step Design
A. Purpose and uses
B. Riser/tread ratios
C. Construction elements
D. Fastener options
X. Retaining Wall Design
A. Purpose
B. Material selection
C. Construction specifications
D. Drainage concerns
XI. Masonry Elements
A. Uses
B. Characteristics
C. Industry specifications
XII. Walkway and Patio Design
A. Construction elements
B. Industry specifications
C. Site preparation
D. Installation procedures
1. Headers
2. Base
3. Dry vs. wet
XIII. Raised Planter and Retaining Wall Design
A. Construction elements
B. Industry specifications
C. Site preparation
D. Installation procedures
1. Foundation
2. Unit courses
3. Mortar techniques
NOTE: All topics covered in lecture are also covered in lab.
Assignments:
Untitled document
Lecture-related Assignments
1. Weekly readings (10-20 pages per week)
2. Written homework assignments
3. Prepare list of materials and cost estimates for two-ten projects
4. Quizzes (2-12)
5. One midterm and final Exam
6. Field trip reports (1-8)
Lab-related Assignments
1. Demonstrate proper use of hand and power tools
2. Design, construct, and install simple wood landscape structures
3. Design a concrete patio and walkway
4. Design masonry patio and walkway
5. Design masonry retaining wall
6. Construct and install simple wood, concrete and/or masonry landscape element
7. Field trips required (1 - 8)
Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing. | Writing 5 - 15% |
Homework, Field trip reports | |
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills. | Problem Solving 20 - 30% |
Material and labor cost estimates | |
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams. | Skill Demonstrations 30 - 40% |
Design and construction projects including tool use | |
Exams: All forms of formal testing, other than skill performance exams. | Exams 20 - 30% |
Quizzes and exam | |
Other: Includes any assessment tools that do not logically fit into the above categories. | Other Category 0 - 20% |
Participation, including field trip attendance | |
Representative Textbooks and Materials:
Untitled document
State Contracting Board, California Contractors License Law & Reference. Lexis Nexis. Current edition
All About Decks. Erickson, Larry. Ortho Books. 2000 (classic)
All About Fences & Gates. Johnston, Larry. Ortho Books. 2001 (classic)
Landscape Construction. 3rd ed. Sauter, David. Cengage L. 2010 (classic)
California Landscape Standards. California Landscape Standards Committee. 1989 (classic)
All About Patios. Erickson, Larry. Ortho Books. 2000 (classic)
All About Masonry Basics. Erickson, Larry. Ortho Books. 2000 (classic)
Print PDF