| 12/26/2024 3:23:14 AM |
| Inactive Course |
| CATALOG INFORMATION
|
| Discipline and Nbr:
MACH 61.2 | Title:
NON-FERROUS METALLURGY |
|
| Full Title:
Non Ferrous Metallurgy |
| Last Reviewed:9/27/2010 |
| Units | Course Hours per Week | | Nbr of Weeks | Course Hours Total |
| Maximum | 3.00 | Lecture Scheduled | 2.00 | 17.5 max. | Lecture Scheduled | 35.00 |
| Minimum | 3.00 | Lab Scheduled | 3.00 | 6 min. | Lab Scheduled | 52.50 |
| | Contact DHR | 0 | | Contact DHR | 0 |
| | Contact Total | 5.00 | | Contact Total | 87.50 |
| |
| | Non-contact DHR | 0 | | Non-contact DHR Total | 0 |
| | Total Out of Class Hours: 70.00 | Total Student Learning Hours: 157.50 | |
Title 5 Category:
AA Degree Applicable
Grading:
Grade Only
Repeatability:
00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As:
Formerly:
MACH 61B
Catalog Description:
Untitled document
Study of non-ferrous metals including alloying, heat treating, testing and applications in industry.
Prerequisites/Corequisites:
Recommended Preparation:
Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Schedule of Classes Information
Description:
Untitled document
Study of non-ferrous metals including alloying, heat treating, testing and applications in industry.
(Grade Only)
Prerequisites:
Recommended:Eligibility for ENGL 100 or ESL 100
Limits on Enrollment:
Transfer Credit:
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP
ARTICULATION, MAJOR, and CERTIFICATION INFORMATION
| Associate Degree: | Effective: | | Inactive: | |
| Area: | | |
| |
| CSU GE: | Transfer Area | | Effective: | Inactive: |
| |
| IGETC: | Transfer Area | | Effective: | Inactive: |
| |
| CSU Transfer: | | Effective: | | Inactive: | |
| |
| UC Transfer: | | Effective: | | Inactive: | |
| |
| C-ID: |
Certificate/Major Applicable:
Certificate Applicable Course
COURSE CONTENT
Outcomes and Objectives:
At the conclusion of this course, the student should be able to:
Untitled document
Upon completion of this course, students will be able to:
1. Identify non-ferrous metals from periodic table.
2. Identify non-ferrous metals by experimentation.
3. Describe methods of heat treat for non-ferrous metals and alloys.
4. Explain various techniques applicable to welding of non-ferrous metals and alloys.
5. Describe applications of design, manufacturing, and fabrication of non-ferrous metals, basic plastics, and ceramics.
Topics and Scope
Untitled document
1. Introduction and review of ferrous metals
2. History and developments of non-ferrous metals and alloys
3. Uses and applications of non-ferrous metals and alloys
4. Testing equipment procedures
5. Research and design methods
6. Library use and research of database for non-ferrous alloys
7. Numbering systems for non-ferrous metals and alloys
8. Heat treatment of mediums and solutions
9. Basic properties of polymers
10. Basic properties of ceramics
11. Various methods of welding non-ferrous metals and alloys
Assignments:
Untitled document
1. Reading assignments of 7 to 15 pages in each chapter
2. Quizzes at each class meeting
3. 7 to 10 laboratory assignments to be completed during lab sessions
4. 1 to 2 mid-term exams
5. A semester group (or individual) project to be presented electronically followed by an oral presentation to the class; the semester project can be substituted with a mid-term paper, as per instructions by instructor, consisting of library research.
6. Final exam
Methods of Evaluation/Basis of Grade.
| Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing. | Writing
20 - 25% |
| Semester project | |
| Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills. | Problem Solving
15 - 25% |
| Lab assignments | |
| Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams. | Skill Demonstrations
0 - 0% |
| None | |
| Exams: All forms of formal testing, other than skill performance exams. | Exams
55 - 60% |
| Exams: multiple choice, true/false, matching items, completion | |
| Other: Includes any assessment tools that do not logically fit into the above categories. | Other Category
0 - 0% |
| None | |
Representative Textbooks and Materials:
Untitled document
Metallurgy Fundamental, by Brandt and Warner, The Goodheart-Wilcox Company, Inc. 5th ed., 2009.
Instructor prepared materials.
Print PDF