SRJC Course Outlines

12/26/2024 6:02:37 PMSURV 53 Course Outline as of Summer 2025

Changed Course
CATALOG INFORMATION

Discipline and Nbr:  SURV 53Title:  ROUTE SURVEYING & DESIGN  
Full Title:  Route Surveying & Design
Last Reviewed:12/13/2021

UnitsCourse Hours per Week Nbr of WeeksCourse Hours Total
Maximum4.00Lecture Scheduled3.0017.5 max.Lecture Scheduled52.50
Minimum4.00Lab Scheduled3.0017.5 min.Lab Scheduled52.50
 Contact DHR0 Contact DHR0
 Contact Total6.00 Contact Total105.00
 
 Non-contact DHR0 Non-contact DHR Total0

 Total Out of Class Hours:  105.00Total Student Learning Hours: 210.00 

Title 5 Category:  AA Degree Applicable
Grading:  Grade Only
Repeatability:  00 - Two Repeats if Grade was D, F, NC, or NP
Also Listed As: 
Formerly:  CEST 53

Catalog Description:
Untitled document
In this course students will study and perform route surveying and design, geometric design, and construction staking of transportation routes. Students will use electronic surveying equipment, computers, and data collectors. The course will include an introduction to photogrammetry and Global Positioning Systems (GPS).

Prerequisites/Corequisites:
Course Completion of APTE 191, CEST 51, and SURV 60


Recommended Preparation:

Limits on Enrollment:

Schedule of Classes Information
Description: Untitled document
In this course students will study and perform route surveying and design, geometric design, and construction staking of transportation routes. Students will use electronic surveying equipment, computers, and data collectors. The course will include an introduction to photogrammetry and Global Positioning Systems (GPS).
(Grade Only)

Prerequisites:Course Completion of APTE 191, CEST 51, and SURV 60
Recommended:
Limits on Enrollment:
Transfer Credit:CSU;
Repeatability:00 - Two Repeats if Grade was D, F, NC, or NP

ARTICULATION, MAJOR, and CERTIFICATION INFORMATION

Associate Degree:Effective:Inactive:
 Area:
 
CSU GE:Transfer Area Effective:Inactive:
 
IGETC:Transfer Area Effective:Inactive:
 
CSU Transfer:TransferableEffective:Fall 1981Inactive:
 
UC Transfer:Effective:Inactive:
 
C-ID:

Certificate/Major Applicable: Both Certificate and Major Applicable



COURSE CONTENT

Student Learning Outcomes:
At the conclusion of this course, the student should be able to:
Untitled document
1. Describe the route location process
2. Properly set up and operate data collection equipment and software
3. Lay out civil engineering designs
4. Prepare and use photogrammetric control in topographic mapping
5. Perform complex computations used in civil engineering construction
 

Objectives: Untitled document
At the conclusion of this course, the student should be able to:
1. Develop a route location for a transportation project
2. Summarize the proper use of the total station and data collector software and hardware
3. Perform a field survey for control, topographic and planimetric surveys
4. Prepare maps, plats and drawings from field data
5. Prepare a photogrammetric surveying layout
6  Perform complex computations related to photogrammetric surveys, right-of-way acquisition surveys, roadway alignments, earthwork volumes, slope staking, and global positioning surveys
7. Design and lay out roadways using civil and surveying Computer Assisted Drafting and Design (CADD) software and hardware and surveying equipment
8. Perform a field survey to slope stake a roadway
9. Compute earthwork and other construction volumes
10. Prepare route surveying documentation for different types of projects

Topics and Scope
Untitled document
I. Route Location Process
  A. Site reconnaissance
  B. Ownership conflicts
  C. Boundary and easement issues
  D. Preliminary and topographic surveys
  E. Preliminary and final route design
II. Control Surveys
  A. Quality Control (QC), Quality Assurance (QA), and network planning
  B. Datum, projection and coordinate system considerations
  C. Primary and secondary control placement
  D. Network densification
  E. Statistical adjustment
III. Data Collectors
  A. Device configuration
  B. Data upload for reconnaissance and stake-out
  C. Data download for export to CADD
IV. Photogrammetry
  A. Basic theory
  B. Aerial survey planning
     1. Neat model
     2. Image overlap and sidelap
     3. Image registration with survey data
V. Highway Geometrics
   A. Straightline segments
   B. Curves: tangent circular, spiral, parabolic
       1. Curve geometry, layout and as-built check
      2. Vertical curvature, crown and drainage
VI. Highway Design and Layout
   A. Freeway, roadway, railway, city street, bridges
   B. Perspectives: plan view, profile view, cross-section, end section
   C. Point of Beginning (POB), stationing, centerline, alignment, cross-sections
   D. Crown, slope and drainage
   E. Grade and vertical curve considerations
VII. Determining Construction Quantities
   A. Area calculations: cross-sections, end area, plan area
   B. Volume calculations: cross-section segments, vertical cuts and fills, borrow pits
VIII. Slope Staking
   A. Centerline elevations
   B. Cross-sectional, cut and fill calculations
   C. Stake marking (labeling placement and flagging)
 
LABORATORY TOPICS AND SCOPE
I. Topcon University - Educational Videos Route and Construction Surveying Methods
II. Route Location Research Exercise
III. Field Mapping and Data Collection Methods
  A. Field notes and field books
  B. Use of compass and tape
  C. Field use of Terrestrial Positioning System (TPS) and Global Positioning System (GPS) surveying devices
       1. Mission Planning / Reconnaissance Techniques
       2. Types of devices and positional accuracy
       3. GPS data collection methods
            a. Navigation
            b. Measurement
            c. GPS device dashboard and controls
       4. TPS data collection methods
            a. Navigation
            b. Measurement
            c. TPS device dashboard and controls
IV. Simple, Reverse and Compound Curve Stakeout Exercise
V.  Radial Stakeout of a Roadway from Control Traverse Exercise  
VI. Median Island Stakeout Exercise
VII. Bus Stop at Intersection Stake-out Exercise
VIII. Storm Drain and Catch Basin Stake-out Exercise
IX. Cul-de-Sac Curb and Gutter, Sanitary Sewer and Storm Drain Stake-out Exercise
X. Elevation Certificate Research
XI. Slope Staking Exercise
XII. Photogrammetry Survey Planning Exercise
XIII. Final Comprehensive Planning and Design Staking Exercise
XIV. Office Processing of Field Data
  A. Data download and storage
  B. Data QC/QA, reduction, edits and preparation
  C. Baseline and vector processing
   D. Vector QC/QA, loop closure check
  E. Adjustment of final solutions
  F. Report preparation

Assignments:
Untitled document
1. Textbook reading (1-3 chapters per week)
2. Homework assignments (6-10)
3. Field work exercises, performance exams and reports (8-12)
4. Exam(s) (1-4)
5. Final exam

Methods of Evaluation/Basis of Grade.
Writing: Assessment tools that demonstrate writing skill and/or require students to select, organize and explain ideas in writing.Writing
0 - 0%
None
This is a degree applicable course but assessment tools based on writing are not included because problem solving assessments and skill demonstrations are more appropriate for this course.
Problem solving: Assessment tools, other than exams, that demonstrate competence in computational or non-computational problem solving skills.Problem Solving
25 - 35%
Homework problem sets, field work exercises and reports
Skill Demonstrations: All skill-based and physical demonstrations used for assessment purposes including skill performance exams.Skill Demonstrations
30 - 40%
Field exercises and performance exams
Exams: All forms of formal testing, other than skill performance exams.Exams
30 - 45%
Exam(s) and final exam
Other: Includes any assessment tools that do not logically fit into the above categories.Other Category
0 - 10%
Class participation


Representative Textbooks and Materials:
Untitled document
Surveying with Construction Applications. 8th ed. Kavanaugh, B. Prentice Hall. 2014 (classic)
Instructor prepared materials

Print PDF